There's no better feeling than the first warm weekend of the year — and in Georgia, that can come early. Getting your pool from its winter slumber to sparkling and swim-ready takes a bit of method, but it's entirely doable with the right sequence. Here's your spring opening checklist.
Step 1: Clear and Remove the Cover
Before pulling the cover, remove standing water and debris from the top so none of it falls into the pool. Once off, clean and dry the cover thoroughly before storing it — a little care here extends its life for years.
Step 2: Reconnect and Inspect Equipment
Reinstall and reconnect anything removed for winter — pumps, filters, and accessories. Inspect for any cracks or wear, especially if a freeze occurred. Make sure the filter is clean and ready.
Step 3: Top Off the Water Level
Bring the water back up to its normal operating level (typically mid-skimmer) so the system can circulate properly.
Step 4: Start Circulation
Power up the system and let the water circulate. Check for leaks, proper flow, and that everything is running as it should before moving on to chemistry.
Step 5: Test and Balance the Water
- Test pH, alkalinity, calcium hardness, and sanitizer levels.
- Balance alkalinity first, then pH, then calcium hardness.
- Shock the pool to clear out anything that built up over winter.
Step 6: Brush, Vacuum, and Clarify
Brush the walls and floor, vacuum any settled debris, and run the filter continuously until the water turns clear. A clarifier can speed things up if the water is cloudy after a long closing.
Step 7: Let It Run and Re-Test
Give the system 24–48 hours of circulation, then re-test and fine-tune. Once your chemistry is balanced and the water is clear, you're ready to swim.
Make It Effortless
If you'd rather skip the trial-and-error and start the season perfectly, a professional opening gets your pool dialed in fast — so you can spend the warm months swimming, not troubleshooting.
Want your pool swim-ready without the hassle?
Contact Our Team